How to clean injection molds properly when maintaining them? Mold cleaning is a key process in mold maintenance and a bottleneck that restricts mold maintenance. Because the speed of mold manufacturing and development is much faster than the speed of mold cleaning, and after rapid mold cleaning, it is necessary to prepare for the next production immediately, so the time left for mold cleaning is quite limited. Through the investigation of the factory, it was found that the molds arranged in the corridors and workshops almost occupy the limited operating space of the workshop, waiting for cleaning.

What are the precautions during the processing of precision plastic molds? The main decision depends on the precision processing requirements of plastic molds. Fine plastic molds are made from plastic materials with high precision requirements, so the processing difficulty is relatively high. There are also many local areas to pay attention to during the processing process. Let's take a look at the precautions and local areas that require special attention.

The advantages of precision injection molding What are the advantages of precision injection molding in Dongguan? 1. From the perspective of corporate environmental protection, the core materials of dual color mold design products can be recycled through the use of secondary materials. 2. Process characteristics: 1) Core materials can use low viscosity materials to reduce injection pressure. 2) Compared to traditional injection molding, the dual material co injection molding process has the following advantages:

The Sustainable Development of the Connector Market Generally refers to electrical connectors. A device that connects two active devices to transmit current or signals. This brings a lot of inconvenience to both production and use. Take car batteries as an example. Assuming that the battery cable is fixed and welded to the battery, installing the battery in a car factory will increase workload, production time, and cost.

What is injection molding? What is injection molding? Many friends outside the industry may not be very clear, so today I will introduce it to you. Injection molding is a method of industrial product production molding. Products usually use rubber injection molding and plastic injection molding. Injection molding can also be divided into injection molding, compression molding, and die-casting.

Temperature Control of Injection Molding for Plastic Mold Processing Temperature control plays a crucial role in plastic mold processing and injection molding, as it can determine whether the product produced is good or bad. At a large scale, even if you hand it over to customers, it will lose their trust in you and cause losses to the company. At a small scale, it's okay to redo it, but remember that these are actually a waste of company resources.