Salt spray environment testing required for connector production Salt mist environment mainly refers to the application environment of medical device connectors, electric vehicle connectors, and underwater application equipment. In general, salt spray environment refers to a salt spray environment formed by a 5% salt solution. Usually, this environment can be used to effectively evaluate equipment or components directly exposed to seawater or land salt, as it is not the real environment. The normal exposure time is between 48 hours and 96 hours.

What should be noted during plastic injection molding operations? 1、 Production process adjustment: 1. Firstly, whether the process parameters are the same as the actual model, material, and mold; 2. At the same time, when inputting process parameters, the pressure speed of the first beer is slightly reduced, and then gradually adjusted (based on the product quality ratio); 3. Production by operators; 4. Check if the machine safety adjustment is safe.

The demand for connectors in miniaturized intelligent devices The design of smaller, more powerful, and interconnected new intelligent devices requires higher performance antennas, PCB connectors, and other components. These design challenges lie in manufacturing suitable application equipment and components. Strategic connector selection and positioning are the first steps to maintaining performance and reliability. In this article, connector manufacturers mainly share the design challenges brought by miniaturized intelligent devices for connectors!

What are the advantages of rotational molding technology in injection mold processing? There are two ways to produce and process injection molds, one is through a new type of rotational molding process, and the other is through traditional blow molding and injection molding processes. Throughout the entire process, we need to look at the characteristics of the rotational molding process in injection mold processing. If the advantages of processing and manufacturing are obvious, the quality of the mold can also be guaranteed. I believe that the future market will also adopt this process, and the mold can be used better.

Precautions for Polishing Injection Molds Injection mold polishing has two purposes; One is to increase the smoothness of the mold, making the surface of the products produced by the mold smooth, beautiful, and beautiful. The other is that the mold can be easily demolded, and the injection mold factory ensures that the plastic does not stick to the mold and cannot be demolded. The precautions for polishing injection molds in injection mold factories are as follows: (1) When starting the processing of a new mold cavity, the surface of the workpiece should be inspected first. The injection mold factory should clean the surface with kerosene to prevent dirt from sticking to the surface of the oilstone and losing its cutting function.

Several issues to be noted in the design and manufacturing of injection molds Firstly, do not focus solely on product design and neglect the manufacturing of injection molds: When developing products or new products, some users tend to focus on product development and neglect communication with ABS injection mold production units. After preliminarily determining the product design plan, contacting the injection mold supplier in advance has three benefits: 1. It can ensure that the designed product has a good molding process and will not change the finalized design, as this part is difficult to process. 2. Injection mold manufacturers can make design preparations in advance to prevent hasty inconsistencies that may affect the project schedule. 3. To produce high-quality injection molds, only through close cooperation between supply and demand can costs be reduced and cycles shortened.